Panel saw FELDER FORMAT 4 KAPPA AUTOMATIC 3200x3200

NUMBER OF WORKED HOURS - 2300

Little used and maintained on an ongoing basis by the FELDER service

Equipment

Saw blade projection 80 mm:
The maximum projection of the saw blade is 80 mm and it is possible to cut both individual boards and plate packs. With the preset end stop, the projection height of the saw blade can be limited to 40 mm. In this way, when cutting individual boards, the saw blade enters the material at a flat angle, which extends its service life.
Cutting range 3200 x 3200 mm:
Cutting length 3200 mm
The range of movement of the material shift beam is 3200 mm
2uxcji
System for guiding the saw unit trolley:
The trolley with the saw unit moves along hardened and precisely ground roller guides. This system allows for high travel speeds of the trolley and guarantees precision thanks to its extremely smooth running. The shaft guide and the rollers are designed for high loads and a long service life.
Saw carriage drive:
The drive is carried out by a high-quality gear and rack system that allows you to reach high speeds. The time of the individual cutting cycles is optimized thanks to the rapid acceleration and deceleration. Direct power transmission from the engine to the rack ensures smooth front travel and perfect cutting results.
▪ smooth adjustment of the cutting speed 0-100 m / min
▪ backward travel 130 m / min
Automatic cutting length recognition:
A laser sensor on the saw carriage detects the end of the plate. When the cut is complete, the trolley stops immediately, the main saw and undercutter blade retracts under the table and the trolley returns to its starting position. This allows you to shorten individual cutting cycles and speed up the execution of planned cuts.
Saw unit motor:
The powerful 12 HP (9 kW) motor enables panel packages to be cut and solid wood to be cut. Equipped with a saw blade with a trapezoidal-flat tooth, diameter = 320 mm, thickness = 4.4 mm, 60 teeth
Scoring unit:
The scoring unit with a 1.5 HP (1.1kW) motor guarantees clean cuts, without tearing of coated and veneered boards. The scoring unit is raised independently of the main saw blade and can be conveniently switched on and off with the control
- e.g. with plywood or solid wood. Equipped with a trapezoidal scoring blade, diam. = 150 mm, thickness = 4.3-5.5 mm, 36 teeth
System of quick mounting of the main saw blade and undercutter:
The main saw blade and scoring saw blade can be quickly and conveniently unscrewed, replaced and reinstalled thanks to the mechanical quick clamping system.
Feed table with miter fence 2000 x 600 mm:
First loading table with dimensions of 2000 x 600 mm with air cushion and roller at the end for easy material loading. A massive 2000mm miter fence is mounted on this table, which allows the material to be accurately positioned at a 90 ° angle to the cutting line, also for heavy plate packages.
Additional tables 1500 x 600 mm:
All subsequent serving tables are referred to as additional tables. The machine is equipped with 2 additional tables with dimensions of 1500 x 600 mm, each with an air cushion, a roll at the end for loading the material.
Plate grippers:
The machine is equipped with 6 single-finger plate grippers, opening range 80 mm. For delicate materials, the clamping force can be adjusted with a pressure gauge and pressure regulator.